Instagram filter used: Normal
Photo taken at: Howery Violins
View in Instagram ⇒
Fiddle Jameson: Cutting and trimming the purfling groove. Once the edge margins are smooth and finished, no bumps etc, that edge is used to guide the process of cutting the purfling groove. I set my CNC machine with a 1.4 mm bit 2mm off the table, and positioned the router forward from a guide pin. Once I’ve tested the dimensions on some scrap wood, I put the plate next to the guide pin and give the command for the router to go to 2mm. Once the router is lowered I carefully guide the plate edge around the guide pin. The router is only used for the long curves, once I get into the corners I retract the router and leave that work to be done by hand. The corners are finished off with the traditional, marker, knife, and purfling cleaning tool.
.
. #violin #viola #fiddle #5stringfiddle #violinJameson #fiddlejamesen
#violinmaker #luthier #cnc #cncviolinmaker #orchestra #fernandinabeach #ameliaisland #brunswickga #staugustine #stmarys #jacksonville #jaxsymphony #unfmusic #jumusic #luthier #whatsonmybench #violinist #symphony #florida #northflorida #Georgia #luthier #whatsonmybench #chambermusic #5string #firstcoast, Howery Violins, Normal